Pretty impressed how well that one turned out. Used SUNLU TPU in yellow with 200/50 degrees Celsius at 20mm/s speed on my Voxelab Aquila (upgraded PEI bed and DirectDrive, also used Filament drybox).

This filament to be exact:

Angebot: SUNLU TPU Filament, 1KG Flexibles 95A TPU 3D Drucker Filament 1.75mm Maßgenauigkeit +/- 0.03 mm, Hohe Liquidität und Elastizität, 1KG（2.2Lbs) Spule, TPU Filament für FDM 3D Drucker,TPU Gelb https://amzn.eu/d/7H5TLjr

  • PdeT@feddit.nlEnglish
    1·
    1 year ago

    That’s awesome! My partner is interested in doing something like that as well.

    • Gorroth@lemmy.worldOPEnglish
      1·
      1 year ago

      Thank you! To be honest it was a bit of work to get my printer ready for TPU, but it’s absolutely worth it. Being able to print this material gives so much additional usecases for 3D printing. Absolutely recommend this!

      • PdeT@feddit.nlEnglish
        2·
        1 year ago

        What did you need to do to get your printer ready? Anything you’ve learned to make it easier a second time?

        • Gorroth@lemmy.worldOPEnglish
          1·
          1 year ago

          I think that heavily depends on the used printer, parts and filament.

          But one tricky thing that comes to mind instantly was e-Steps. I got a metal dual gear Extruder and didn’t realize that the gear was smaller than the original. Because of that I had to change the e-steps in the printers firmware-settings so it knows how much it needs to turn in order to get one mm of filament through. As I didn’t know that I had some crazy underxtrusion and warping problems. Took quite a while to figure out (not only a problem with TPU).

          But generally if your partner wants to get into TPU printing, I would get at least a direct drive upgrade. TPU is a flexible material and it’s better to press it in the Hotend as directly as possible. Also print very slow to get better results.

          • PdeT@feddit.nlEnglish
            2·
            1 year ago

            Thanks for the advice! Fortunately, our Fokoos comes with a direct drive, so that’s checked off already. I think our major hurdle right now will be to keep filament properly dry, as I read TPU can get quite finicky with that.

            I hadn’t thought of the printing speed yet, though - appreciate the help!

      • hinterlufer@lemmy.worldEnglish
        1·
        1 year ago

        What use cases for example? I can print TPU and have some lying around, but I have no idea what to use it for. The only useful thing I printed with it so far was new endcaps for a ladder.