This is a quick one, not an impressive repair, but maybe a nice demonstration of the perks of keeping stuff until its useful. I found a multi-socket extension cord/usb charger while digging through ewaste (I fix up laptops and give the stuff I find away on my local.Buy Nothing -type group).

Someone had really yanked on it (probably the plug was stuck behind something heavy) and when it came free, two of the prongs were bent, and the ground prong was ripped out altogether.

I had a spare 120v plug - about a year ago, I took some old extension cords from an estate cleanout. Awhile later, while helping a friend build an arcade cabinet, I dug one out and cut the socket off it to wire the cabinet up for electricity. Unfortunately, the sheathing around the individual wires inside the cord had crumbled away to almost nothing, and it wasn’t safe to use. I gave the copper to a friend who sells metal to a junkyard, and kept the plugs from either end.

The actual rewiring isn’t difficult, just stripped the wires and attached them to the correct terminals. I used an old neon tester my neighbor gave me to check my work. It lit up just fine and I didn’t trip the circuit. Later I plugged a bricked, ewaste 1st gen ipad into the usb socket and it started charging just fine. So it looks like this worked out

So there’s my excuse for why I keep all these odds and ends.Even when it’s something as simple as this, there’s something wonderful about being able to take multiple pieces of junk, combining them, and suddenly having a useful item.

  • AgnosticMammal
    link
    fedilink
    arrow-up
    4
    arrow-down
    1
    ·
    7 months ago

    Hell yeah.

    It’s a lot more frustrating if they make it impossible to fix but it is damn satisfying when you’ve prevented something from going to the trash.

    I’ve also used this sort of work to create a spliced power cord for a two monitor setup but I could only spare one plug.