Can anyone suggest what causes these lines across the page?

Is a new toner cartridge likely to fix this?

Edit: Line separation is 62.5mm

Edit 2: Thank you to everyone who replied. I’ve ordered a new toner cartridge and will update this if that solves the problem 🫡

Final update: A new toner cartridge fixed it. It’s now printing perfectly! Thank you.

  • UnH1ng3d@lemmy.worldOP
    1·
    3 months ago

    The lines haven’t become any lighter. Is this a problem I will be able to see if I take the printer apart? Thank you for replying 🙂

    • BillDaCatt@lemmy.worldEnglish
      1·
      3 months ago

      You might be able to see it on the fuser roller but it probably won’t be the sort of thing you can wipe off without making it worse.

      From the model number shown on your test page (Samsung ML-1660) it looks like a replacement fuser kit is about $30 - $50 dollars depending on the seller. I would encourage you to either replace the fuser or look for a new printer.

      • UnH1ng3d@lemmy.worldOP
        2·
        3 months ago

        According to others it is likely the toner cartridge anyway but where do you find the fuser kits if I decide I need one? I looked on eBay and there are none for sale (in my country anyway).

          • UnH1ng3d@lemmy.worldOP
            2·
            3 months ago

            I didn’t think to look on Ali. You even removed the tracking part from the link too 😉 If it turns out to be that, I’ll buy one and replace it. Thank you