• TWeaK@lemm.ee
      cake
      link
      fedilink
      English
      arrow-up
      7
      arrow-down
      1
      ·
      10 months ago

      It sounds like they were working at a station and the train was passing through, my guess is they put the train on the wrong tracks or something.

      • TheFonz@lemmy.world
        link
        fedilink
        arrow-up
        10
        ·
        10 months ago

        It was a joke about the trolley problem (philosophy) although internet can never miss a joke done in bad taste

    • interdimensionalmeme@lemmy.ml
      link
      fedilink
      arrow-up
      5
      ·
      10 months ago

      I blame the non-interventionist for not getting involved and stopping this accident even if it might have killed one other person.

  • spitz@lemmy.ml
    link
    fedilink
    arrow-up
    19
    ·
    10 months ago

    I worked in rail for a bit, and almost got hit once. Saw many many near misses. People think “how could you not notice a train roaring towards you?!”. But these things can happen with alarming ease.

    • auth@lemmy.ml
      link
      fedilink
      arrow-up
      12
      arrow-down
      4
      ·
      edit-2
      10 months ago

      Should be easily preventable though… They follow a known path after all

        • auth@lemmy.ml
          link
          fedilink
          arrow-up
          2
          arrow-down
          3
          ·
          edit-2
          10 months ago

          The employees could be sharing their GPS locations at all times and the train could know not to hit them… Or something along those lines

          • monsieur_jean@kbin.social
            link
            fedilink
            arrow-up
            10
            ·
            10 months ago

            This is already how it works.

            When workers need to access a portion of railtrack (a block), they need to request a possession and isolation from the command center of the line. A possession means no train can approach less than two blocks from the block they will work on, and an isolation means the power is cut (most lines in Europe are electrified).

            The procedure to perform this has been specifically designed to avoid miscommunications, with multiple back and forth between the operators on the ground and the command center to ensure one doesn’t mindlessly make a mistake. Usually it’s done by phone but I believe some lines now have apps for it.

            This accident should not have happened. If the possession had been granted then at the very least the signaling system would have warned the train driver to stop several kilometers before he reached them. On modern lines the train would have stopped automatically, without human intervention. And signaling systems are extremely robust, they don’t “bug” in a way that makes this possible.

            To me this must be a human error. Either the workers worked without a possession (because they though it would be ok, the line was not operating at that time, it was a short operation, yadda yadda. The exact reason why possession requests are mandatory…) or it was an old line and the train driver was not paying attention to the point of ignoring several, big reg lights telling him to stop.

            Either way, no GPS location sharing would have helped if someone disregarded safety instructions. :/

            Source : I’m not an expert but I did an internship in a company who designs signaling systems in Europe and my project was specifically on the subject of replacing phone calls for possession and isolation with an app on a PDA.

            • philpo@feddit.de
              link
              fedilink
              arrow-up
              1
              ·
              10 months ago

              Ferrovie dell stato has stated today towards RAI that the works should not have started until this train had passed. It looks very much like the workers did not have possession of the tracks. Some sourced claim that the manager had not received permission and was possibly not even on site.

              Interesting is the fact that the train is in relatively pristine condition if you look at RAIs videos - they definitely didn’t already have heavy machinery in place or they did put it on another track (which is unlikely as the according to the Ferrovie statement the accident happened on the track they were supposed to work on). Another interesting fact is the speed of the train - which had two conductors onboard,btw: The train was doing 160km/h - this is not a speed you use in a segment that you expect works on another track to be done.

              Personally if I had to bet money on one theory I would guess the manager (who was the one certified to work with Ferrovie) was not on site/not concentrated, the workers were told when the last train goes through/there was some miscommunication with the guys on scene and they either mistook another train as the “last” train or the “last” one was late/not in their schedule and they started simply by the clock.

              Or someone in the control center fucked up beyond believe and that is much more unlikely tbh.

              Anyway, those poor bastards, poor families and friends and even poor villages. They basically are all locals.

          • NumbersCanBeFun@kbin.social
            link
            fedilink
            arrow-up
            4
            arrow-down
            5
            ·
            edit-2
            10 months ago

            I used to be a blue collar worker that now works in the office. This is the same as the other unrealistic solutions I put up with regularly.

            So now we are going to add another device, which adds another point of failure, that needs to be maintained and monitored constantly.

            What happens if that device fails? Who is paying for the expense of this upgrade and the training for the conductor and ground workers to operate and monitor this? What happens if they are distracted while troubleshooting the device and the train approaches them anyways? What happens when the blue collar worker doesn’t give a fuck about safety and turns it off because it’s annoying? This is not a simple fix and rather it adds layers of complications to the entire process.

            Especially when it would just be easier to I don’t know, maybe not run so many trains back to back all the time and ensure that the track is closed off? The real issue here is that the company does not want to lose profit, so they are willing to skirt safety concerns by continuing to operate trains while they are being maintained. However every time I make an argument like this it gets shut down and some new idiot tries to recommend more technology to solve something as simple as “turn it off”.

            • monsieur_jean@kbin.social
              link
              fedilink
              arrow-up
              1
              ·
              10 months ago

              Keep it simple, stupid. Can’t agree more. And that’s a central concept in computer systems and procedures when human lives are involved.

              • NumbersCanBeFun@kbin.social
                link
                fedilink
                arrow-up
                1
                ·
                10 months ago

                Thank you kindly. I’m actually a huge tech nerd at heart, so it kind of pains me to kill off something cool like that but when it comes to safety I don’t mess around. Simple and straightforward are usually the safest options.

                If I sent my boys out to do something, I want them back home to their families later that night in the same condition I sent them there in.

      • XTornado@lemmy.ml
        link
        fedilink
        arrow-up
        7
        ·
        10 months ago

        Trains are really unpredictable. Even in the middle of a forest two rails can appear out of nowhere, and a 1.5-mile fully loaded coal drag, heading east out of the low-sulfur mines of the PRB, will be right on your ass the next moment.

        I was doing laundry in my basement, and I tripped over a metal bar that wasn’t there the moment before. I looked down: “Rail? WTF?” and then I saw concrete sleepers underneath and heard the rumbling.

        Deafening railroad horn. I dumped my wife’s pants, unfolded, and dove behind the water heater. It was a double-stacked Z train, headed east towards the fast single track of the BNSF Emporia Sub (Flint Hills). Majestic as hell: 75 mph, 6 units, distributed power: 4 ES44DC’s pulling, and 2 Dash-9’s pushing, all in run 8. Whole house smelled like diesel for a couple of hours!

        Fact is, there is no way to discern which path a train will take, so you really have to be watchful. If only there were some way of knowing the routes trains travel; maybe some sort of marks on the ground, like twin iron bars running along the paths trains take. You could look for trains when you encounter the iron bars on the ground, and avoid these sorts of collisions. But such a measure would be extremely expensive. And how would one enforce a rule keeping the trains on those paths?

        A big hole in homeland security is railway engineer screening and hijacking prevention. There is nothing to stop a rogue engineer, or an ISIS terrorist, from driving a train into the Pentagon, the White House or the Statue of Liberty, and our government has done fuck-all to prevent it.

    • Bread@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      3
      ·
      10 months ago

      Same thing with airplanes. They might be gigantic and loud as fuck, but they can still sneak up on you easier than you might think.

      • cuacamole@feddit.de
        link
        fedilink
        arrow-up
        2
        ·
        10 months ago

        Thats the thing, they are loud when standing besides, they arent loud when youre standing in front.

  • AutoTL;DR@lemmings.worldB
    link
    fedilink
    English
    arrow-up
    4
    ·
    10 months ago

    This is the best summary I could come up with:


    At least five people have died after a train hit railway workers at high speed close to a station in Italy.

    The workers, aged between 22 and 52, were replacing part of a track outside the northern city of Turin when they were killed.

    They had been working on the line between Turin and Milan when the empty passenger train went through Brandizzo station at a reported 160km/h (100mph).

    In a statement, Italian railway network (RFI) expressed its “deep sorrow” for the incident.

    Italian reports said the workers had been replacing about 10m of track when the empty train transporting a dozen wagons went through Brandizzo station at high speed.

    The mayor of Brandizzo, a small town to the north-east of Turin, said he would wait until the outcome of the inquiry but a communication error could not be ruled out.


    The original article contains 223 words, the summary contains 141 words. Saved 37%. I’m a bot and I’m open source!