Each ring will be contributing to the growing e-waste problem after a couple of years or so.

Each ring will be contributing to the growing e-waste problem after a couple of years or so.

  • nicerdicer@feddit.orgEnglish
    7·
    3 months ago

    This is a very good question from the comments of the ifixit article. It would have been smart, if that “cut here” feature would have been included into the concept. It would have underlined that this indeed is a smart device.

    Another thing about rings in general: some injuries can cause your finger to inflame. Then the ring acts as a tourniquet, cutting off blood flow. If the EMT or doctor can’t cut off the ring, they have to amputate the finger. This came up a lot when people were making rings out of titanium or carbon fiber or other high-strength materials. Here you have a ring with a lithium battery and no “cut here” marks. Does anyone really want to risk an un-extinguishable fire in an ambulance with oxygen cylinder nearby? mikedesimone - 22 hours ago

    Agreed. At least have lines on the ring, where one can cut without causing further issue. A Smart ring is going too far, in the tech world, because of it’s repairabillity status. Jri-creator - 12 hours ago

      • nicerdicer@feddit.orgEnglish
        3·
        3 months ago

        Cutting the ring on a designated place would allow to remove the ring from a finger in case of an emergency. But you can’t cut the ring in a random place, because of the battery. It would be helpful when there is a marking where to cut the ring safely. The ring would be destroyed anyway. But a functioning finger is probably worth more than this gadget.

        Imagine your ring needs to be cut off while you are in the hospital: without knowing where the battery is placed it is a guessing game for the doctors where to cut the ring. This is a risk, because when the battery gets cut it will react with the ambient oxygen in the air, causing a fire which is hard to put out, since it can’t be extinguished easily.