I did all the same steps. I downloaded the file. I wrote it to the SD card, but then when I go to start it up, I just get this loading screen that lasted about an hour before I just shut it down.

What am I doing wrong here?

  • Lost_My_Mind@lemmy.worldOPEnglish
    1·
    2 months ago

    What is a district in this context?

    And yeah, I have the Raspberry Pi Imager. That’s what I used to write my previous OS’s to my SD cards.

    Years ago I used Rasbian, which I guess is now called Raspberry Pi OS. Years ago my fan worked. Then I switched to TwisterOS, and that worked great too. Then there was some issue with something. I forget what. But in order to fix it, I was instructed to do an update all.

    I did, and my fan broke. I spent weeks trying to get it working again. It would work on raspbian, but not TwisterOS.

    I had hundreds of gigs of roms on it, and I didn’t want to format and start again. So I threw it in a drawer, and got frustrated with the thing. Well this week, I wanted to get it working, and even on Raspberry Pi OS the fan script won’t work. It installs, but it doesn’t do anything…

    • Possibly linuxMEnglish
      6·
      2 months ago

      You didn’t install it. You just wrote a iso to a drive. The device tries to boot into the live image and fails as it is the wrong architecture. If you were to write Linux mint to a USB and then boot your computer off of it you could install it to your computer. It is for computers not raspberry pis (over simplification but pretty much true)

      For raspberry pi you need a dedicated OS that supports it. Linux Mint does not support the raspberry pi

      Side note: I don’t know what a district is but I assume it is a typo

    • henfredemars@infosec.pubEnglish
      4·
      2 months ago

      I believe the poster meant to write distribution. I don’t believe that Linux Mint releases for Raspberry Pie or if it does I’m not aware of this. The main downloads are for Intel or AMD machines only.

    • harsh3466@lemmy.mlEnglish
      2·
      2 months ago

      As the other commenters said, “district” was an autocorrect typo. I meant distro/distrubution.

      I can’t speak to what’s wrong with the fan, but if you use imager and write a supported distribution to the sd card, you can see if the fan works again, and/or try troubleshooting again.

      Also, consider that it could be a hardware issue. The fan could just be dead. Hardware fails, and you should try to rule that out.