Swiss startup Sun-ways is planning to build a 18 kW pilot PV system between the racks of a 100-m linear section of a railway line in the Swiss canton of Neuchâtel.
My first reaction was how stupid this is. Dirt, debris and other things will get on the panels and cause lots of problems, but after a few minutes I realized it’s actually quite brilliant.
There are three major costs of solar, the panels, the location, and the wiring + inverters. If the tracks are used as the wires (extremely low resistance paths back to an inverter), the location is wasted space so basically free, and the inverter can be placed anywhere along the path to remove the power from the tracks, the cost of this comes down to mainly the cost of the panel, which is actually pretty cheep these days.
The real challenges will be in cleaning & maintenance, vandalism, and modifying the track to limit the conductive paths (assuming they’re used for this).
They’re not. Swiss rails are extra made so that you can walk over them. All electricity goes overhead for security reasons. If anything, they would probably tap into this overhead-grid.
cleaning & maintenance
possibly. But I can very easily imagine specialized trains cleaning them once every day
vandalism
not really a problem here in switzerland
modifying the track to limit the conductive paths (assuming they’re used for this).
They’re most likely not used for this. All electricity is overhead for security reasons, routing solar energy through the rails would destroy that. Doing that (beyond the 100m test-track) would mean a prolongued political discussion.
All electricity is overhead for security reasons, routing solar energy through the rails would destroy that. Doing that (beyond the 100m test-track) would mean a prolongued political discussion.
Electricity is overhead for safety reasons (maybe that’s what you meant by “security reasons”). As long as the voltage is kept low (< 48V) and the runs of solar panels aren’t too long, the power can be run safely in the tracks.
So I have a solar setup-older panels, like 15 years old. They can be 3/4 obscured by a building or whatever, and still make 85% of what they’re rated to.
Which is fucking awesome. Right now, they’re covered in so much dust I can see the ‘clean’ spots where the morning dew condensed on them, and they’re still kicking 20 amps, about 15 more than I actually need.
Daily cleaning? Way excessive. Monthly? Maybe, probably less. Not a whole lot going on in between rails.
I’d be way more worried about tweakers trying to steal the wiring
The cleanliness of the panels isn’t actually as big a deal as it’s made out to be. Like yeah, they can’t be completely obscured, but you’d be surprised at how fucking filthy they can be and still make juice. Or half-or more- covered with trees, or other shade.
Right now, my panels are covered in enough crap I really should hose them off, and they’re still kicking 20 amps. So ahhh… fuck it. Maybe it’ll rain and I won’t have to.
Same with cloudy days-sometimes I get more power on cloudy days because the panels don’t get at hot. Hell, some streetlights put out enough light to harvest energy from-but they’re largely getting replaced with LED’s. Sad face?
I expect with the type of traffic going on between rails, these will need vanishingly little maintenance. I hope it goes well
Standing next to trains as they pass, or on one’s with open decks, you’ll know they produce a lot of wind. I assume under the train this is even stronger, with a strong low pressure area. This should be able to clear most obstructions without an issue whenever a train passes. Sure, it’ll also toss more on, but there’s some equilibrium that it’ll reach and it shouldn’t ever get worse. My guess is that’s well before it is a major issue for the panels.
My first reaction was how stupid this is. Dirt, debris and other things will get on the panels and cause lots of problems, but after a few minutes I realized it’s actually quite brilliant.
There are three major costs of solar, the panels, the location, and the wiring + inverters. If the tracks are used as the wires (extremely low resistance paths back to an inverter), the location is wasted space so basically free, and the inverter can be placed anywhere along the path to remove the power from the tracks, the cost of this comes down to mainly the cost of the panel, which is actually pretty cheep these days.
The real challenges will be in cleaning & maintenance, vandalism, and modifying the track to limit the conductive paths (assuming they’re used for this).
They’re not. Swiss rails are extra made so that you can walk over them. All electricity goes overhead for security reasons. If anything, they would probably tap into this overhead-grid.
possibly. But I can very easily imagine specialized trains cleaning them once every day
not really a problem here in switzerland
They’re most likely not used for this. All electricity is overhead for security reasons, routing solar energy through the rails would destroy that. Doing that (beyond the 100m test-track) would mean a prolongued political discussion.
Electricity is overhead for safety reasons (maybe that’s what you meant by “security reasons”). As long as the voltage is kept low (< 48V) and the runs of solar panels aren’t too long, the power can be run safely in the tracks.
So I have a solar setup-older panels, like 15 years old. They can be 3/4 obscured by a building or whatever, and still make 85% of what they’re rated to.
Which is fucking awesome. Right now, they’re covered in so much dust I can see the ‘clean’ spots where the morning dew condensed on them, and they’re still kicking 20 amps, about 15 more than I actually need.
Daily cleaning? Way excessive. Monthly? Maybe, probably less. Not a whole lot going on in between rails.
I’d be way more worried about tweakers trying to steal the wiring
The cleanliness of the panels isn’t actually as big a deal as it’s made out to be. Like yeah, they can’t be completely obscured, but you’d be surprised at how fucking filthy they can be and still make juice. Or half-or more- covered with trees, or other shade.
Right now, my panels are covered in enough crap I really should hose them off, and they’re still kicking 20 amps. So ahhh… fuck it. Maybe it’ll rain and I won’t have to.
Same with cloudy days-sometimes I get more power on cloudy days because the panels don’t get at hot. Hell, some streetlights put out enough light to harvest energy from-but they’re largely getting replaced with LED’s. Sad face?
I expect with the type of traffic going on between rails, these will need vanishingly little maintenance. I hope it goes well
Throw a few of those sexy lady mud flaps on the back of a train with a hose. Darn near auto squeegee!
Standing next to trains as they pass, or on one’s with open decks, you’ll know they produce a lot of wind. I assume under the train this is even stronger, with a strong low pressure area. This should be able to clear most obstructions without an issue whenever a train passes. Sure, it’ll also toss more on, but there’s some equilibrium that it’ll reach and it shouldn’t ever get worse. My guess is that’s well before it is a major issue for the panels.