Welcome to today’s daily kōrero!

Anyone can make the thread, first in first served. If you are here on a day and there’s no daily thread, feel free to create it!

Anyway, it’s just a chance to talk about your day, what you have planned, what you have done, etc.

So how’s it going?

  • eagleeyedtiger@lemmy.nz
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Nothing specific in mind yet, but I definitely want to learn about the battery storage side of things as well, so ideally yes

    • NoRamyunForYou@lemmy.nz
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      I’ve lost a lot of the links I used to have when I was looking into this stuff, but I’ll throw a few things out there in the hopes that are able to use something from the pile to search up on google etc.

      Disclaimer, I’m typing a lot of this stuff from memory so some of it may be wrong

      I prefer DIYing things that I can, but for anything related to power, I will purchase off the shelf components that are know to work - just to keep my risks as low as possible.

      The basic circuit would look like this: SOLAR PANEL --> SOLAR CHARGE CONTROLLER --> BATTERY --> OUTPUT LOAD

      Solar Panels

      You will find a lot of different “types” of Solar Panels, but that is mostly in their rating. The bigger a solar panel, the more electricity it can generate. The ratings will usually be given in a combination of Power (Watts, W), and Voltage (Volts, V). These two are related with the following equation:

      Power (W) = Voltage (V) * Current (I)

      The quicker you want to charge your batteries, the more Watts you will need.

      (You can combine Solar Panels (in either Parallel or Series) to give you more Power. Combining multiple panels may be a little bit more advanced (but not really as long as you know what your doing). I would recommend to start off with one panel, and then design and add as required https://battlebornbatteries.com/solar-panels-in-series-or-parallel/#:~:text=When you wire multiple panels,output voltages stay the same.

      Solar Charge Controllers

      Whatever Solar Panel you end up getting will have a rating. This is most likely going to be in Watts (W), which is a combination of the Voltage (V) and Current (I) (where Power (W) = V * I). When you measure the output of a solar panel, you will see that the Voltage fluctuates (due to clouds, orientation etc.), and hence, your overall Wattage will fluctuate.

      For various reasons, having this type of fluctuation is not the best when your are tying to charge a battery. Hence, we use “Charge Controllers”. A Charge Controller is specific to the type of Battery you end up using (There’s a brief breakdown of some common battery types below). A Charge Controller will take the output from your Solar Panel, and will regulate what it needs to regulate, and output energy into the battery. As an example, Jaycar has a lot of different Solar Charge Controllers (They are in no way the best, but have linked them because people are familiar with them. Look for other offerings as well) https://www.jaycar.co.nz/power-batteries/solar-power/solar-charge-controllers/c/0HC?sort=popularity-desc&q

      You will notice that there are “PWM” type and “MPPT” Solar Charge Controllers. MPPT are more expensive compared to their PWM counterparts, and with the way they work, they are basically more efficient in getting the Energy that you gather from your Solar Panel, into your Battery. PWM is still a valid option. When choosing your Solar Charge Controller, make sure they are compatible with the Voltage rating of your Solar Panels & Batteries, and that they are able to handle the amount of current your system will be pumping into the battery at max.

      The Solar Charge controller should have Output Terminals as well, where you can connect the Load that you want to power (or you can connect them directly to the battery if your Voltage requirements are the same as your battery voltage). Here’s a User manual of a MPPT Charge Controller that also includes some diagrams as to how everything would be wired up (page 14) https://www.jaycar.co.nz/medias/sys_master/images/images/9959654293534/MP3741-manualMain.pdf

      For the microcontroller work that I do (very lower power usage), I use these Solar Charge Controllers https://www.adafruit.com/product/4755

      Battery Type

      You have a few choices for different types of Batteries

      1. Sealed Lead Acid (SLA) Batteries - These are your common car battery types. They are usually good for giving you a short burst of power, but they aren’t very energy dense (i.e., for the same physical size, other types of batteries will give you more energy/capacity). Adding to this, they cannot utilize their full rated capacity (usually good for about 50% of their rated capacity), and their rated life (counted in number of times you deplete the battery (discharge cycles)) is comparatively quite low. Per unit, they are the cheapest (but be sure to take into account, actual capacity available, and the lifespan of the battery).

      2. Lithium Ion Batteries - These are the batteries found in our phones and most portable electronics. They are very energy dense, and you can utilize all of their capacity. They have a longer life, but they are known to catch on fire / explode when not taken care of properly. You MUST take care when using Lithium Ion batteries, and really know what you are doing. This includes ensuring you use a Battery Management System (BMS) specifically for Li-Ion Batteries. However, with proper care, the risk becomes very low.

      3. LiFePo4 Batteries - Very similar to the above mentioned Lithium Ion (In fact these are Lithium batteries too), but they are said to be safer than Li-Ion batteries. They also have a much greater life when compared to Li-ion, but they are more expensive.

      4. NiCad Batteries - For the same amount of energy, they are bigger than lithium based batteries. They also suffer from a “memory effect”, where if you keep charging them before they are fully depleted, your batteries capacity will decrease (as the battery “thinks” the point at which you charge is empty).

      • eagleeyedtiger@lemmy.nz
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Wow thanks for taking the time for the write up! The MPPT controllers are significantly more pricey, are they that much more efficient? I’m going to absorb as much as this as I can and see if I can come up with a project.

        Can I ask what you use your microcontrollers for?

        • NoRamyunForYou@lemmy.nz
          link
          fedilink
          arrow-up
          3
          ·
          edit-2
          1 year ago

          No worries :)

          Personally, unless you were thinking about quite a serious setup (DIY home solar for example), especially for a first project I would get a PWM Charge Controller. Looking online, it seems the differences aren’t big enough to warrant the jump in price.

          The latest project I was working on was my own take on a “Smart” Greenhouse. The microcontroller takes in readings from a few different sensors, and controls fans, watering, opening/closing windows. I haven’t played around with it in a while, but I hope to revive it once we move into our new place :)

          Feel free to reply here or message me if you have any other questions later on. I can’t guarantee I’ll have an answer, but I might? :)

          • eagleeyedtiger@lemmy.nz
            link
            fedilink
            arrow-up
            3
            ·
            1 year ago

            Thanks, that sounds like a cool project! I was thinking of something to control a drip watering system for the raised beds, but then I haven’t actually needed to water them for about 6 months now haha

            • NoRamyunForYou@lemmy.nz
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              Yeah tell me about it haha, hopefully El Nino doesn’t completely flip it the other way and we have another drought.

              Were you wanting to add sensors or anything to control the drip watering system? The easiest way I can think of would be to buy one of those drip timers that runs off the tap (mains water). Not too sure how they are powered, but I guess you could run it off Solar?

              • eagleeyedtiger@lemmy.nz
                link
                fedilink
                arrow-up
                3
                ·
                1 year ago

                From what I can tell most digital ones are battery powered and the ones made for solar are pretty pricey. You think it’s possible to retrofit a battery one for solar? Sensors are probably a good idea, but I haven’t thought that far ahead… or at least some way to connect it to Home Assistant so it can use weather forecasts or just remotely turn it off and on.

                Now that you mention El Nino, I’m thinking of getting some kind of rain water collection though 🤔

                • NoRamyunForYou@lemmy.nz
                  link
                  fedilink
                  arrow-up
                  2
                  ·
                  1 year ago

                  Same. I’ve been wanting to get some sort of rain water collection system going. The new place we’re moving into has sort of a raised garden bed in between two retaining walls - maybe something could be buried there in the future.

                  I don’t have any experience doing anything like that, but I don’t see why it wouldn’t be possible. Depending on what type of battery it takes, there will be a voltage that the whole thing is designed to work with. It’s would then be a matter of setting up a small solar panel -> Charge Controller -> Battery System, and then making sure the output voltage from your battery is near enough what the unit requires. This can be done using voltage regulators to bring the voltage you are supplying, up or down to the required level.

    • NoRamyunForYou@lemmy.nz
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      1 year ago

      I’ve lost a lot of the links I used to have when I was looking into this stuff, but I’ll throw a few things out there in the hopes that are able to use something from the pile to search up on google etc.

      Disclaimer, I’m typing a lot of this stuff from memory so some of it may be wrong

      I prefer DIYing things that I can, but for anything related to power, I will purchase off the shelf components that are know to work - just to keep my risks as low as possible.

      The basic circuit would look like this: SOLAR PANEL --> SOLAR CHARGE CONTROLLER --> BATTERY --> OUTPUT LOAD

      Solar Panels

      You will find a lot of different “types” of Solar Panels, but that is mostly in their rating. The bigger a solar panel, the more electricity it can generate. The ratings will usually be given in a combination of Power (Watts, W), and Voltage (Volts, V). These two are related with the following equation:

      Power (W) = Voltage (V) * Current (I)

      The quicker you want to charge your batteries, the more Watts you will need.

      (You can combine Solar Panels (in either Parallel or Series) to give you more Power. Combining multiple panels may be a little bit more advanced (but not really as long as you know what your doing). I would recommend to start off with one panel, and then design and add as required https://battlebornbatteries.com/solar-panels-in-series-or-parallel/#:~:text=When you wire multiple panels,output voltages stay the same.

      Solar Charge Controllers

      Whatever Solar Panel you end up getting will have a rating. This is most likely going to be in Watts (W), which is a combination of the Voltage (V) and Current (I) (where Power (W) = V * I). When you measure the output of a solar panel, you will see that the Voltage fluctuates (due to clouds, orientation etc.), and hence, your overall Wattage will fluctuate.

      For various reasons, having this type of fluctuation is not the best when your are tying to charge a battery. Hence, we use “Charge Controllers”. A Charge Controller is specific to the type of Battery you end up using (There’s a brief breakdown of some common battery types below). A Charge Controller will take the output from your Solar Panel, and will regulate what it needs to regulate, and output energy into the battery. As an example, Jaycar has a lot of different Solar Charge Controllers (They are in no way the best, but have linked them because people are familiar with them. Look for other offerings as well) https://www.jaycar.co.nz/power-batteries/solar-power/solar-charge-controllers/c/0HC?sort=popularity-desc&q

      You will notice that there are “PWM” type and “MPPT” Solar Charge Controllers. MPPT are more expensive compared to their PWM counterparts, and with the way they work, they are basically more efficient in getting the Energy that you gather from your Solar Panel, into your Battery. PWM is still a valid option. When choosing your Solar Charge Controller, make sure they are compatible with the Voltage rating of your Solar Panels & Batteries, and that they are able to handle the amount of current your system will be pumping into the battery at max.

      The Solar Charge controller should have Output Terminals as well, where you can connect the Load that you want to power (or you can connect them directly to the battery if your Voltage requirements are the same as your battery voltage). Here’s a User manual of a MPPT Charge Controller that also includes some diagrams as to how everything would be wired up (page 14) https://www.jaycar.co.nz/medias/sys_master/images/images/9959654293534/MP3741-manualMain.pdf

      For the microcontroller work that I do (very lower power usage), I use these Solar Charge Controllers https://www.adafruit.com/product/4755

      Battery Type

      You have a few choices for different types of Batteries

      1. Sealed Lead Acid (SLA) Batteries - These are your common car battery types. They are usually good for giving you a short burst of power, but they aren’t very energy dense (i.e., for the same physical size, other types of batteries will give you more energy/capacity). Adding to this, they cannot utilize their full rated capacity (usually good for about 50% of their rated capacity), and their rated life (counted in number of times you deplete the battery (discharge cycles)) is comparatively quite low. Per unit, they are the cheapest (but be sure to take into account, actual capacity available, and the lifespan of the battery).

      2. Lithium Ion Batteries - These are the batteries found in our phones and most portable electronics. They are very energy dense, and you can utilize all of their capacity. They have a longer life, but they are known to catch on fire / explode when not taken care of properly. You MUST take care when using Lithium Ion batteries, and really know what you are doing. This includes ensuring you use a Battery Management System (BMS) specifically for Li-Ion Batteries. However, with proper care, the risk becomes very low.

      3. LiFePo4 Batteries - Very similar to the above mentioned Lithium Ion (In fact these are Lithium batteries too), but they are said to be safer than Li-Ion batteries. They also have a much greater life when compared to Li-ion, but they are more expensive.

      4. NiCad Batteries - For the same amount of energy, they are bigger than lithium based batteries. They also suffer from a “memory effect”, where if you keep charging them before they are fully depleted, your batteries capacity will decrease (as the battery “thinks” the point at which you charge is empty).