This will likely have some technical inaccuracies because I’ve never dealt with something this specific with PSUs. I have two slots for PCIe. I have a 3070 ti which has two 8 pin connectors. Each of this PSU’s cords for the PCIe slots (minus that mysterious 600W one which I think is not for anything I’m doing due to the size) goes from the 12 pin on the PSU to two separate 8 pin connectors (well, 6 with the optional 2).

My gut feeling is to just plug a single cord from the PCIe slots I to the two slots on my GPU. But I’m wondering about what would happen if I plugged two cords into the PCIe slots separately and then put a single connector into the GPU from each. Would that be better/worse/the same/catastrophic?

I’m wondering if it has something to do with dividing the current among the different rails in the PSU or something? It has a little jumper to enable “overclocking” which does something like combining the rails, but I’d rather not fool with that. And it also might be totally unrelated to the other question. The jumper is, of course, just out of view of the pic, but it’s also not really relevant.

Edit: I went with one and it’s working fine.