xkcd: Coordinate Precision but pi (π)?

I tried looking for some answer but found mostly

  • People reciting pi
  • People teaching how to memorize pi
  • How to calculate pi using different formula
  • How many digits NASA uses

Update question to be more specific

In case someone see this later, what is the most advanced object you can build or perform its task, with different length of pi?

0, 3 => you can’t make a full circle

1, 3.1 => very wobbly circle

2, 3.14 => perfect hole on a beach

3, 3.142 => ??

4, 3.1416 => ??

5, 3.14159 => ??

Old question below

In practice, the majority of people will never require any extra digit past 3.14. Some engineering may go to 3.1416. And unless you are doing space stuff 3.14159 is probably more than sufficient.

But at which point do a situation require extra digit?
From 3 to 3.1 to 3.14 and so on.

My non-existing rubber duck told me I can just plug these into a graphing calculator. facepalm

y=(2πx−(2·3.14x))

y=abs(2πx−(2·3.142x))

y=abs(2πx−(2·3.1416x))

y=(2πx−(2·3.14159x))

Got adequate answer from @dual_sport_dork and @howrar
Any extra example of big object and its minimum pi approximation still welcome.

  • dual_sport_dork 🐧🗡️@lemmy.world
    link
    fedilink
    arrow-up
    71
    arrow-down
    1
    ·
    1 year ago

    On the NASA front, I believe I read somewhere that NASA determined that only 40 decimal places of pi are required to define a sphere the size of the observable universe to the accuracy of +/- the width of one hydrogen atom. It seems like you could file that under “close enough.”

    Just using 3 is certainly too low of a precision – unless you’re writing a major work of religious literature, of course. 3.1 is likewise unlikely to result in acceptable accuracy on a terrestrial scale. I’ve always used 3.14159 which is conveniently exactly what I can remember without looking it up and it’s always been good enough for me. I don’t think I’ve ever in my life needed to scribe a circle much larger than a couple of feet across at any rate.

    You may be interested in reading this: https://blogs.scientificamerican.com/observations/how-much-pi-do-you-need/

    • user45178@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Then why did we need to put in so much effort to get to the 100 billionth or so? When all we could ever need are 40, maybe 50 if you want?

      • Pons_Aelius@kbin.social
        link
        fedilink
        arrow-up
        13
        ·
        edit-2
        1 year ago

        It is not about actual use when they calculate pi to tthese numbers.

        It is about finding out if pi is actually irrational or is it recurring on some level.ie: does it start repeating at some point.

        • vrighter@discuss.tchncs.de
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          nope, just for testing computers. We know pi is transcendental. Which implies it is irrational. This has been mathematically proven.

          We don’t need to check. We know that it does not repeat.

          • Chobbes@lemmy.world
            link
            fedilink
            arrow-up
            7
            ·
            1 year ago

            There’s facts about pi we don’t know, though. We have not proved whether or not pi contains every finite sequence of digits. A breakthrough about this will probably have little to do with brute force computing billions of digits of pi, but maybe there can be a clue there. As far as I know we basically just calculate a bunch of pi to flex. It’s the mathematical equivalent of walking around shirtless to show off your abs.

        • jasory@programming.dev
          link
          fedilink
          arrow-up
          1
          ·
          10 months ago

          Nope. Alexander Yee literally just wrote the program for shits and giggles. (Even the mathematical routines aren’t generally useful).

          Pi can be proven to be irrational with a pen and paper.

      • AlataOrange@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        In addition to what @Pons_Aelius replied, it is also used as a benchmark/flex for computers, as to who can build a beefy enough machine or good enough card to calculate more digits of pi.

        • jasory@programming.dev
          link
          fedilink
          arrow-up
          1
          ·
          10 months ago

          Nobody optimises their computer build by targeting pi computation. LAPACK benchmarks are far more useful, because linear algebra is actually extensively use; nobody calculates transcendental constants beyond IEE754 precision.

          Additionally that’s not how hardware is designed.

    • AmidFuror@kbin.social
      link
      fedilink
      arrow-up
      4
      arrow-down
      1
      ·
      edit-2
      1 year ago

      Upvoted for religious text reference. Another way to put it would be if you are OK with being off by 33% for insect leg count, you can use 3 for pi.

    • g6d3np81@kbin.socialOP
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Thank you, I already skimmed through that article before posting. Maybe I failed to put my question into words properly.

      I want examples similar to pool/fence circumference in the article. Along the line of “We’re building x, and this is the worst rounding we can go, one fewer digit and it will be off by y

    • AA5B@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      When we round pi to the integer 3 … to estimate the circumference of an object with a diameter of 100 feet, we will be off by a little over 14 feet.

      It seems like ‘3’ is sufficient for real life. It’s probably more precise that I can freehand draw a circle. If I really did need to measure the fencing for a circle with diameter 100’, it’s within the window of padding I would estimate

      • For those still in the dark, I’m referencing the bible in 1 Kings 7, 23-26:

        And he made a molten sea, ten cubits from the one brim to the other: it was round all about, and his height was five cubits: and a line of thirty cubits did compass it round about. And under the brim of it round about there were knops compassing it, ten in a cubit, compassing the sea round about: the knops were cast in two rows, when it was cast. It stood upon twelve oxen, three looking toward the north, and three looking toward the west, and three looking toward the south, and three looking toward the east: and the sea was set above upon them, and all their hinder parts were inward. And it was an hand breadth thick, and the brim thereof was wrought like the brim of a cup, with flowers of lilies: it contained two thousand baths.

        Those measurements would only work if either the cauldron were not actually circular, or if Pi were equal to 3.