there’s a few different versions of that laptop. if you can post your exact model number from the tag on the bottom i can walk you through cleaning it and help you figure out if there’s anything that can be upgraded.
those spin convertibles have pretty weak cooling like all laptops do, so a lot of the time just opening the sucker up and cleaning out all the cat hair and foot skin does wonders.
i’m sure someone else has already asked about software stuff, but are you on windows 10 or 11?
I posted the wrong one, its the SP513-52, i5-8250U and 8GB memory. I just cleaned out the fan and heatsink, also redid the thermal paste. That definitely helped to get some performance back. The memory is not upgradeable which is a huge pain. Looks like the older model had a SODIMM slot and they removed it in the next iteration. And there’s only one M.2 slot inside so upgrading drives is doable but annoying. I’ve not attempted to upgrade storage when there’s only one drive slot before.
I’ve just been stubbornly refusing to install Windows 11. lol, I’m probably going to finally switch to Linux before doing that
everybody has a different process for storage upgrades. mine is to get an external enclosure that fits the drives going in and coming out, install the new one in the enclosure, hook it up and use macrium reflect to clone the existing drive to the new one, then power everything down and swap em out. it’s been very never fail for me. i think you can use macrium on macs too, but for some reason i use superduper there.
the nice thing about doing the storage upgrade that way is that you end up with an exact in place drop in backup in case the new storage fails somehow or something doesn’t work, and after youre comfortable with the upgrade, you’ve got a new external drive.
if you already have a license or have been looking to get one, the new version of spinrite has a scan type that can be used to both level wear on ssds and fix low speed from old bits.
e: make sure to disable bitlocker before doing a clone. it’s pretty easy to figure out if you have it enabled, i think manage-bde -status tells you in all versions of 10.
Yeah in that way I guess the worst case is that the cloning fails and I still have the old drive, for no loss. I’ll give it a go. Do you have any recommendation for a known-good SATA M.2 enclosure?
Anything is fine really. There’s a $15 usbc one on Amazon that’s fine. They’re all b+m keyed and sized for a 2280. If you get one with a heat sink it would be best if the heat sink actually made contact with the device and wasn’t just for show lol.
Make sure the old one is actually 2280. M2 2280 is a physical size spec, 22 mm. x 80mm from the edge of the connector to the center of the mounting screw hole.
Early on lots of places would just say any m2 drive was 2280 and you’d end up buying something that didn’t fit. Measure twice, cut once or whatever.
Maybe check the keying too? I don’t think you’ll have a weird one but they’re either keyed five or ten pins in or both.
there’s a few different versions of that laptop. if you can post your exact model number from the tag on the bottom i can walk you through cleaning it and help you figure out if there’s anything that can be upgraded.
those spin convertibles have pretty weak cooling like all laptops do, so a lot of the time just opening the sucker up and cleaning out all the cat hair and foot skin does wonders.
i’m sure someone else has already asked about software stuff, but are you on windows 10 or 11?
I posted the wrong one, its the SP513-52, i5-8250U and 8GB memory. I just cleaned out the fan and heatsink, also redid the thermal paste. That definitely helped to get some performance back. The memory is not upgradeable which is a huge pain. Looks like the older model had a SODIMM slot and they removed it in the next iteration. And there’s only one M.2 slot inside so upgrading drives is doable but annoying. I’ve not attempted to upgrade storage when there’s only one drive slot before.
I’ve just been stubbornly refusing to install Windows 11. lol, I’m probably going to finally switch to Linux before doing that
hell yeah!
everybody has a different process for storage upgrades. mine is to get an external enclosure that fits the drives going in and coming out, install the new one in the enclosure, hook it up and use macrium reflect to clone the existing drive to the new one, then power everything down and swap em out. it’s been very never fail for me. i think you can use macrium on macs too, but for some reason i use superduper there.
the nice thing about doing the storage upgrade that way is that you end up with an exact in place drop in backup in case the new storage fails somehow or something doesn’t work, and after youre comfortable with the upgrade, you’ve got a new external drive.
if you already have a license or have been looking to get one, the new version of spinrite has a scan type that can be used to both level wear on ssds and fix low speed from old bits.
e: make sure to disable bitlocker before doing a clone. it’s pretty easy to figure out if you have it enabled, i think manage-bde -status tells you in all versions of 10.
that’s really good to know, thanks.
Yeah in that way I guess the worst case is that the cloning fails and I still have the old drive, for no loss. I’ll give it a go. Do you have any recommendation for a known-good SATA M.2 enclosure?
Anything is fine really. There’s a $15 usbc one on Amazon that’s fine. They’re all b+m keyed and sized for a 2280. If you get one with a heat sink it would be best if the heat sink actually made contact with the device and wasn’t just for show lol.
Make sure the old one is actually 2280. M2 2280 is a physical size spec, 22 mm. x 80mm from the edge of the connector to the center of the mounting screw hole.
Early on lots of places would just say any m2 drive was 2280 and you’d end up buying something that didn’t fit. Measure twice, cut once or whatever.
Maybe check the keying too? I don’t think you’ll have a weird one but they’re either keyed five or ten pins in or both.