I have a decently-sized homelab, and a large home network. I also have IPv6 disabled everywhere. Compared to a normal home network, my config is very complex. (Extensive firewall and routing rules, multiple gateways, multiple subnets and VLANs, inbound traffic filtering, and plenty more.) With the exception of VLANs, IPv6 would require reconfiguring EVERYTHING. What’s the advantage?

Fuck that. I don’t care where they’re from. Scammers don’t deserve to be treated with respect or dignity. They are subhuman trash and ruin people’s lives.

The specs say it replaces a traditional 500w-1500w light source with a 200w LED fixture. I’m honestly surprised at how low that is overall. I would expect that a lighthouse would be using at least 10kw of power or more, especially in areas prone to fog. I can only assume that there are lenses to focus it down to a tight beam.

For comparison, I recently installed LED lights in a moderately-sized industrial area. Total power consumption is a little over 2kw, or 10 lighthouses.

In the US at least, most equipment (unless you get into high-and datacenter stuff) runs on 120V. We also use 240V power, but a 240V connection is actually two 120V phases 180-degrees out of sync. The main feed coming into your home is 240V, so your breaker panel splits the circuits evenly between the two phases. Running dual-phase power to a server rack is as simple as just running two 120V circuits from the panel.

My rack only receives a single 120V circuit, but it’s backed up by a dual-conversion UPS and a generator on a transfer switch. That was enough for me. For redundancy, though, dual phases, each with its own UPS, and dual-PSU servers are hard ro beat.

I probably should have specified I’m using libcurl, but I did try the equivalent of what you suggested. I even tried setting a list of user agents and having it cycle through. None of them work. A lot of anti-scraping methods use much more complex schemes than just validating the user agent. In some cases, even a headless browser will be blocked.

Speaking from experience, be careful you don’t become over-zealous in your anti-scraping efforts.

I often buy parts and equipment from a particular online supplier. I also use custom inventory software to catalog my parts. In the past, I could use cURL to pull from their website, and my software would parse the website and save part specifications to my local database.

They have since enacted intense anti-scraping measures, to the point that cURL no longer works. I’ve had to resort to having the software launch Firefox to load the web page, then the software extracts the HTML from Firefox.

I doubt that their goal was to block customers from accessing data for items they purchased, but that’s exactly what they did in my case. I’ve bought thousands of dollars of product from them in the past, but this was enough of a pain in the ass to make me consider switching to a supplier with a decent API or at least a less restrictive website.

Simple rate limiting may have been a better choice.

Is Creative Cloud a requirement for using Adobe products these days? Surely someone can just save data locally instead. Media files (especially raw video) can be enormous.

What is human connection, though? It’s your brain releasing dopamine because you spent time with another person. It matters to you because it makes you feel good. Other things can make you feel good, too. The difference is that hobbies and activities won’t let you down. They won’t stop being your hobby because they’d rather spend time with someone else. People are unreliable and ultimately selfish at heart.

Say you make a friend. 60 years from now, you and your friend are both dead, and what’s left behind? Nothing. I’m not old, but I’m certainly not young either. It took me a while to realize that other people just don’t matter. In the end, nothing matters at all; everything you and I do is ultimately going to fade into irrelevance when we’re dead. Might as well make the most of the time we have alive, then; do something that makes you happy. Don’t rely on another selfish human being for your happiness.

You don’t. People need fulfillment, not human interaction. Find something you are passionate about and pour your time and effort into it. Buy a classic car and restore it. Learn how to make your own furniture. Start learning photography. Write a book. Develop a program or app. Start a fitness routine. Brew your own beer. Learn a foreign language. The list is endless.

What matters is doing something that brings you satisfaction. A hobby that involves creating something or improving yourself is so much better than wasting time with other people. Spend a day hanging out with friends, and what do you have at the end of the day? Nothing. Spend a day planting a garden, and what do you have at the end of the day? You have a nice garden.

This seems like a weird and convoluted way to charge for content. Why not just make it a paid DLC?

the study, which is yet to be peer-reviewed…

This is important.

Microsoft knows that the addition of adds to Windows, Recall, data mining, etc are not suicide. As far as tech news goes, Lemmy really exists in an echo chamber. The vast majority of us at least have some interest in technology. For the majority of the population, though, this isn’t true. The typical person sees a computer as a tool to be used for other things. They’re not reading articles about the latest release of Windows, new CPU technology, the latest GPU, etc. They’re using their computer, and when it’s time for an upgrade, they buy whatever suits their needs.

If I was to ask any of my family, or most of my coworkers, about any of the latest “controversies” surrounding Microsoft, they would have no idea what I was talking about. Microsoft obviously thinks that the added profits gained by monetizing their customers will offset the loss of 1% of their users that switch to Linux. They’re probably right, too.

I like Windows, personally (well, Windows 10 at least). My unofficial rule has always been if it needs a GUI, then it runs Windows, otherwise, it runs Linux as a headless machine. Once Windows 10 is no longer a viable option, my unofficial rule will be “it runs Linux.” Most people will not make this switch.

Outside of obvious ethnic names, which isn’t an issue here, how does the seller even know what a potential buyer looks like?

I never spoke to the previous owner of my home, and I have no idea what they look like. The opposite is also true. I have a name on various forms, but that’s it. Our only correspondence was through various documents sent between our agents. I didn’t even see the seller at closing; we signed the closing documents at different times.

It sounds like her real estate agent is on her side, so unless the agent was trying to sabotage the sale, how does this happen?

Yes, a lot of my movies are 50GB or so. Not everything has a 4k repack available, though. I’d say the vast majority are around 20GB.

1080p would just not be acceptable for me. There’s a clear difference between 1080p and 4k on a 4k screen, especially if the screen is large.

If I’m in a situation where I don’t have connectivity to stream from my server, then I can always just start a Handbrake queue the night before and transcode a few videos to smaller size, or just dump a few onto an external drive. I have never been in a situation where I had to do this, though.

Any sort of media, including videos, I always go for the highest possible quality I can. I do have a number of 4k displays, so it makes sense to a certain extent, but a lot if it has to do with future-proofing.

Here’s a good example: When personal video cameras were first starting to support 1080, I purchased a 1080i video camera. At the time, it looked great on my 1920x1080 (maybe 1024x768, not sure) monitor. Fast forward over 15 years later, and it the video I recorded back then looks like absolute garbage on my 4k TV.

I remember watching a TV show when 1080p video first became available, and I was blown away at the quality of what was probably a less-than-1GB file. Now watching the same file even on my phone has a noticeable drop is quality. I’m not surprised you saw little difference between a 670MB and a 570MB file, especially if it was animation, which contains large chunks of solid colors and is thus more easily compressed. The difference between two resolutions, though, can be staggering. At this point, I don’t think you can easily find a 1080p TV; everything is 4k. 8k is still not widespread, but it will be one day. If you ever in your life think you’ll buy a new TV, computer monitor, or mobile device, eventually you’ll want higher quality video.

My recommendation would be to fill your media library with the highest-quality video you can possibly find. If you’re going to re-encode the media to a lower resolution or bitrate, keep a backup of the original. You may find, though, that if you’re re-encoding enough video, it makes more sense to save the time and storage space, and spend a bit of money on a dedicated video card for on-the-fly transcoding.

My solution was to install an RTX A1000 in my server and set it up with my Jellyfin instance. If I’m watching HDR content on a non-HDR screen, it will transcode and tone-map the video. If I’m taking a break at work and I want to watch a video from home, it will transcode it to a lower bitrate that I can stream over (slow) my home internet. Years from now, when I’m trying to stream 8k video over a 10Gb fiber link, I’ll still be able to use most of the media I saved back in 2024 rather than try to find a copy that meets modern standards, if a copy even exists.

Edit: I wanted to point out that I realize not everyone has the time or financial resources to set up huge NAS with enterprise-grade drives. An old motherboard and a stack of cheap consumer-grade drives can still give you a fair amount of backup storage and will be fairly robust as long as the drive array is set up with a sufficient level of redundancy.

I think one thing that’s very important for the worldwide audience to consider is what the involved countries count as “peace.” Peace for Ukraine is “give us our land back and stop attacking us.” Peace for Russia is “We’ll stop attacking you if you let us have a significant portion of you country as our own.” Obviously, the Russian “solution” is not an acceptable one. Sadly, I feel like China and other Russian-aligned countries probably support the distorted Russian version of “peace.”

What do you mean specifically? If I’m already testing between two VMs, doesn’t that already isolate any issues to Proxmox? Is there another performance metric you think I should be looking at?

When I use OpenSpeedTest to to test to another VM, it doesn’t read or write from the HDD, and it doesn’t leave the Proxmox NIC. It’s all direct from one VM to another. The only limitations are CPU are perhaps RAM. Network cables wouldn’t have any effect on this.

I’m using VirtIO (paravirtualized) for the NICs on all my VMs. Are there other paravirtualization options I need to be looking into?

I still enjoy the second-wave stuff from time to time, but you’re absolutely spot-on with what’s been coming out in recent years. I’m really into groups that have kept the original BM music style but embraced modern production. A few that come to mind are Faidra, Spectral Wound, Asarhaddon, and Funeral Winds; fantastic bands that play “true” BM but have good recording quality.

Like you mentioned, the big change is just how many “crossover” bands there are, and I’m all for it. You didn’t ask for suggestions, but I’m going to offer some of my favorites anyway:

• Harakiri for the Sky - One of the best post-black bands.
• Anomalie (shares members with Harakiri for the Sky) - BM plus what I can only call “tribal” elements.
• Psyclon 9 (at least their older albums) - BM plus industrial/aggrotech.
• Dawn of Ashes - See above.
• Anaal Nathrakh - BM + grind + industrial + ?
• Darkthrone (yes, THAT Darkthrone) - Blackened hard rock? I don’t know what to call their new stuff, but it’s not bad.
• Gaerea - Radio-friendly BM
• Kanonenfieber - Blackened melodic death metal? Maybe?
• Afsky - Folk-inspired BM. Seems like this is a really popular combination.
• None - DSBM, but with the exception of their filler tracks, more on the BM, less on the DS.
• Ernte - Fairly traditional BM, but with female vocals.

It was a good suggestion. That’s one of the first things I checked, and I was honestly hoping it would be as easy as changing the NIC type. I know that the Intel E1000 and Realtek RTL8139 options would limit me to 1Gb, but I haven’t tried the VMware vmxnet3 option. I don’t imagine that would be an improvement over the VirtIO NIC, though.