Yes it would. In my case though I know all of the users that should have remote access snd I’m more concerned about unauthorized access than ease of use.
If I wanted to host a website for the general public to use though, I’d buy a VPS and host it there. Then use SSH with private key authentication for remote management. This way, again, if someone hacks that server they can’t get access to my home lan.
Their setup sounds similar to mine. But no, only a single service is exposed to the internet: wireguard.
The idea is that you can have any number of servers running on your lan, etc… but in order to access them remotely you first need to VPN into your home network. This way the only thing you need to worry about security wise is wireguard. If there’s a security hole / vulnerability in one of the services you’re running on your network or in nginx, etc… attackers would still need to get past wireguard first before they could access your network.
But here is exactly what I’ve done:
Now I can just turn on my phone’s VPN whenever I need to access any one of the services that would normally only be accessible from home.
P.s. there’s additional steps I did to ensure that the masquerade of the VPN was disabled, that all VPN clients use my pihole, and that I can still get decent internet speeds while on the VPN. But that’s slightly beyond the original ask here.
A couple of options in my opinion, as I just did this myself:
You can use the CLI tool to “upload” them. You can even do this from the server itself. So upload times would be as fast as your network card can process or however fast your server is, whichever is slower. It does require that you create an API key for the user in question though.
Otherwise you can create an external library and link that to your account. Now Immich will still index this library but it won’t move or manage the actual files. I’m not sure though if it looks at those files for duplicates (i.e. if you try and upload the same photo from your phone to the server). This external library will also prevent deleting photos as well, FYI.
There might be other options that I’m not aware of, as I’ve only been using Immich for about a month now.
Edit: link to the CLI documentation: https://immich.app/docs/features/command-line-interface/
deleted by creator
Correct. As I can only provide links to posts that are on your selected home instance. Eventually I’ll change this but you’ll get a 404 page for links that aren’t on your home instance, but see my P.S. below.
P.s. there have been changes to the Lemmy API that have prevented me from getting updates for about a month now. So most of the results you’re seeing are from old posts only. Until I can rebuild the crawler or find a new API there won’t be any new content.
So I’m totally save-scumming along the way, at least for my first playthrough. But damn was that fight hard even on normal. Was finally able to save Isobel but it ended up costing me Jaheira as she got swarmed by 3 of the enemies while I was dumping everything into Marcus. And at this point not going to try again.
Question though, when I got to the inn only a few tieflings were there and the rest had been kidnapped? Not sure what I might have missed to cause that?
Tap the everything label at the top
Heads up your copied post just went to the same community, so it looks like you have duplicate postings.
Playing devil’s advocate for a bit… So these are just cross-posts. Which existed even on Reddit. …I assume they weren’t handled in any way in Sync or Reddit?
But let’s say this is fixed… What to do about the multiple comments threads? How would you reconcile them with each other? Especially since the user can choose different ways to sort the comments as well. Would all of this logic normally handled by the Lemmy back-end now need to run on your phone? Also how do you choose which post / instance to actually display and which ones to hide?
Btw, I’m not trying to dismiss the idea. Just want to call out some of the technical problems that might come up trying to implement such a feature. As well as ask questions to try and determine exactly how such a feature is expected to work.
I’m guessing Samsung. Google seems to show a handful of posts online about Samsung users asking about it. Or at least asking what is it, and how to uninstall it.
Pixel doesn’t seems to have it pre-installed anyway.
I can’t say anything about other manufacturers though.
FYI: https://en.m.wikipedia.org/wiki/Honeypot_(computing)
But there should also be a separate endpoint to get an auth token. (I don’t remember it off the top of my head). Then your bot should store that somewhere and send it as the auth parameter in every request.
Ya if it’s not federated already, I’m thinking the link will just remain as-is? Then comes the question of what happens after federation is complete? Ideally I’m thinking to do these rewrites as the comment containing the link gets federated so it only happens once, but that prevents updates… If I do it during someone looking at the post, then that becomes a lot of network traffic…
Still a lot to plan out initially and then propose to the devs for feedback… So it’ll be awhile still.
I just got a PR merged today that might help with this. I’ll start experimenting with it more over the next week or so.
Basic theory is that I can detect at least lemmy posts in the comment bodies and then rewrite those to your local instance. Primarily question is going to be performance, as remote network calls will be necessary.
Not saying a tool like this isn’t helpful for you but personally I don’t think I’d ever trust a service to analyze my code and provide accurate comments. There’s so many little quirks and ultimately nuance in what is written vs what and why it’s doing it that I’d never expect anyone but the original author of the code to get it right.
I’ve been trying to read up on the terms for in-app donations to developers for iOS but everything seems to be rather old. Anyway, just curious if a donation link runs a fowl of the terms of service or if you have to use in-app purchases and have Apple take their cut?
Fair enough. Sometimes you can’t help but go down these rabbit holes though.
How do you account for the duplicate Riker in TNG? Who’s the real one and where did the extra matter come from then to assemble William vs Tom?
(It’s been a long time since I’ve seen that episode so I don’t remember if they covered that but on-screen)
A similar question could be raised for the Rascals episode…
Not sure if I entirely understand what you’re asking but here’s my setup that sounds similar-ish that might help.
I’ve got essentially 3 machines
The download machine has a network share to download directly to the NAS in a special /downloads/ folder. Once a download completes Sonarr, etc… move it to it’s correct media folder.
Finally the Jellyfin machine is monitoring the media folders for changes.
I assume you could set up something similar with Plex instead of jellyfin and then store the fully downloaded files on a separate machine with a network drive, so Plex can see it. Essentially the NAS for you would be two machines one (the seedbox) for the partial downloads and a local NAS for the fully downloaded files?
Anyway, not sure if that’s what you’re looking for.
Think of Lemmy as email. Each post or comment is just an email sent to a distribution group (a community). If your email server goes down, all of those users and distribution groups are gone. Now I’ll still have the emails I sent to you in my email box but you won’t be able to see them as your email server is offline. Sure you could create a new account on a new server but you’d have to tell everyone about your new address (federate) but there’s nothing to associate your old user with your new one and there’s no way to backfill data. I could reply-all or forward (comment) on to your new address but there’s still no way to associate those old posts with your new account.
What phone do you have? I just upgraded last night and everything appears to be working like normal. But I did notice that you appear to have a smaller screen size than I do. First I’d try adjusting the display size and see if that helps. You can find that setting (on a pixel) under: Settings -> Display -> Display Size and Text.
You can also try adjusting the accessibility settings and increase or decrease the font size to see if that helps. Which you can find in the same menu above.
Lastly, you might try enabling developer settings and adjusting the smallest width:
Edit: none of these should be final solutions but to help troubleshoot what’s wrong. You can then use what you find with these three options to raise a ticket and hopefully the developers can then narrow down the actual root cause.