Back in my day, /dev/hda was the primary master, hdb was the primary slave, hdc was the secondary master and hdd was the secondary slave.
Nothing ever changed between reboots. Primary/secondary depended on which port the ribbon cable connected to on the motherboard, and primary/secondary master/slave was configured by a jumper on the drive itself.
If you had a Sound Blaster 16, you had an extra IDE port on the board, which DOS couldn’t see and you had to load special drivers to use them. Usually it was used for the CD-ROM.
Back in my day, /dev/hda was the primary master, hdb was the primary slave, hdc was the secondary master and hdd was the secondary slave.
Nothing ever changed between reboots. Primary/secondary depended on which port the ribbon cable connected to on the motherboard, and
primary/secondarymaster/slave was configured by a jumper on the drive itself.Yeah, and ide only supported 4 drives at a time in most systems
If you had a Sound Blaster 16, you had an extra IDE port on the board, which DOS couldn’t see and you had to load special drivers to use them. Usually it was used for the CD-ROM.