True. The main airspace restrictions on ultralights that are not on certificated aircraft are a prohibition against flying over congested areas (yellow on a sectional chart), and within the lateral boundaries of Class E airspaces around airports. (You can’t fly an ultralight in the class E airspace around an airport, nor in the Class G airspace underneath that Class E)
Certificated aircraft (including balloons) can be flown over congested areas and within Class E and G airspaces.
The limitations on flight in A, B, C, and D airspaces are similar for both: flight is prohibited without specific authorization arranged beforehand.
Interestingly, if an ultralight somehow received permission to enter Class E(controlled) airspace, they still cannot descend into the Class G (uncontrolled) below it. That Class G is within the lateral boundaries of the Class E, and the controller’s authority does not extend to that airspace.
Descend and land. You’d have done that long before “starting to enter” restricted air space. Otherwise enjoy your fine and potentially losing your license once the FAA finds out.
It’s like not you can accidentally enter restricted air space. You know you’re going to be entering the airspace long before you get there so there is plenty of time to take action.
Small airports aren’t really an issue tho. FAA won’t come after you for that. But you should always know where you are, where the restricted air spaces are, with a plan to avoid them. If not you’re fucking up as a captain.
Restricted airspace’s are there for a reason. It’s for safety and not paying attention to them has consequences.
I’m an unlicensed ultralight pilot and I know where I can and cannot fly. Every ultralight pilot I know also knows where to fly (and how to read a sectional).
There are sectional charts on the ground, available to the general public, not just licensed pilots. If you’re going to fly, you are expected to know the relevant airspace long before you fly in it.
That’s true, but “not knowing” is a far more egregious violation. Licensed or not, a pilot is expected to know where they are allowed to fly, and where they actually are. “I didn’t know it was restricted” is the aviation equivalent of driving the wrong way on the freeway.
Sectional Charts are freely available from the FAA in digital form, and cheaply (<$10) available on paper. They have a legend that shows how controlled airspace, congested areas, and airports are depicted, along with more than enough landmarks for orientation. Every pilot, licensed or not, must know where they can and cannot fly their aircraft.
You presume a scenario where you make this realization while you are in the air. In practice, you made this realization hours earlier, and adjusted your flight plan to avoid that problem. You selected a launch site that avoids putting you in that situation.
If I do find myself encroaching on controlled airspace, I could declare an emergency, inform the controller where I am so they can vector traffic away from me, and do what I need to do to get down safely. At the very least, I would expect to do a lot of paperwork, and possibly have my license suspended.
With Class B and C airspace, the boundary is altitude dependent. The outer ring of Class C is 10 miles from the airport. I can fly between 5 and 10 miles of Akron Canton Airport, I just can’t climb above 2500’ MSL while in that area. I generally plan my flights to stay outside 10 miles, with the understanding that I can just stay below their airspace if I happen to get too close.
Don’t forget you’re still not allowed in a lot of US Airspace even if you don’t require a license for it.
True. The main airspace restrictions on ultralights that are not on certificated aircraft are a prohibition against flying over congested areas (yellow on a sectional chart), and within the lateral boundaries of Class E airspaces around airports. (You can’t fly an ultralight in the class E airspace around an airport, nor in the Class G airspace underneath that Class E)
Certificated aircraft (including balloons) can be flown over congested areas and within Class E and G airspaces.
The limitations on flight in A, B, C, and D airspaces are similar for both: flight is prohibited without specific authorization arranged beforehand.
Interestingly, if an ultralight somehow received permission to enter Class E(controlled) airspace, they still cannot descend into the Class G (uncontrolled) below it. That Class G is within the lateral boundaries of the Class E, and the controller’s authority does not extend to that airspace.
Sure but the vast majority of US airspace is uncontrolled.
So. What do I do if I start floating over controlled airspace? I can’t make it go any other way.
Descend and land. You’d have done that long before “starting to enter” restricted air space. Otherwise enjoy your fine and potentially losing your license once the FAA finds out.
It’s like not you can accidentally enter restricted air space. You know you’re going to be entering the airspace long before you get there so there is plenty of time to take action.
Actually, a lot of people don’t realize they’re in restricted airspece. There’s more small airports than people realize.
Small airports aren’t really an issue tho. FAA won’t come after you for that. But you should always know where you are, where the restricted air spaces are, with a plan to avoid them. If not you’re fucking up as a captain.
Restricted airspace’s are there for a reason. It’s for safety and not paying attention to them has consequences.
Yes, but unlicensed people won’t know where they are. It’s not like there’s signs in the sky.
If there are, landing might not be the best option! Best to fly over the apocalypse 👍
I made this for you: https://i.imgur.com/gS8IMb2.jpeg
I’m an unlicensed ultralight pilot and I know where I can and cannot fly. Every ultralight pilot I know also knows where to fly (and how to read a sectional).
There are sectional charts on the ground, available to the general public, not just licensed pilots. If you’re going to fly, you are expected to know the relevant airspace long before you fly in it.
That’s true, but “not knowing” is a far more egregious violation. Licensed or not, a pilot is expected to know where they are allowed to fly, and where they actually are. “I didn’t know it was restricted” is the aviation equivalent of driving the wrong way on the freeway.
Sectional Charts are freely available from the FAA in digital form, and cheaply (<$10) available on paper. They have a legend that shows how controlled airspace, congested areas, and airports are depicted, along with more than enough landmarks for orientation. Every pilot, licensed or not, must know where they can and cannot fly their aircraft.
Flight planning.
You presume a scenario where you make this realization while you are in the air. In practice, you made this realization hours earlier, and adjusted your flight plan to avoid that problem. You selected a launch site that avoids putting you in that situation.
If I do find myself encroaching on controlled airspace, I could declare an emergency, inform the controller where I am so they can vector traffic away from me, and do what I need to do to get down safely. At the very least, I would expect to do a lot of paperwork, and possibly have my license suspended.
With Class B and C airspace, the boundary is altitude dependent. The outer ring of Class C is 10 miles from the airport. I can fly between 5 and 10 miles of Akron Canton Airport, I just can’t climb above 2500’ MSL while in that area. I generally plan my flights to stay outside 10 miles, with the understanding that I can just stay below their airspace if I happen to get too close.