I have read many conflicting things, like always. Just wondering if there’s a safe way to use several DE’s on one distro without messing up my damn computer lol I’ve tried it several times and it always messed things up. I’m currently brand new to fedora workstation 38 too btw. Thanks alot

  • nous@programming.devEnglish
    452·
    10 months ago

    What things are being messed up? You should be able to just install as many DEs as you want without them interfering with each other - just select which you want on the login screen,

    • Macaroni9538@lemmy.mlOP
      9·
      10 months ago

      is it really that simple? I was trying ways to like separate them or block them from each other

      • addie@feddit.uk
        22·
        10 months ago

        No, it really is that simple. I’ve got Cinnamon installed since I prefer it for everyday; also, Gnome3 on Wayland for gaming (I’ve three monitors with different refresh rates, which doesn’t work as you’d hope on X11). Log out, change desktop, log in again. No problems at all, except for more packages to update.

      • azvasKvklenko@sh.itjust.worksEnglish
        11·
        10 months ago

        Pretty much, yes but they will interfere in few ways:

        • themes setup can get messy at times, but you should be able to easy override the settings
        • file associations can be inappropriate
        • you’ll have varoius of app suits installed and app menus will have them all
        • Macaroni9538@lemmy.mlOP
          1·
          10 months ago

          man yoiu would think there’s an easy way to keep the DE’s seperate from one another to avoid any conflictions. without freaking VM damnit lol

          • azvasKvklenko@sh.itjust.worksEnglish
            2·
            10 months ago

            I think it was PureOS or some other distros that allowed to run DEs in containers, but I never tried this. It all boils down to the dotfiles in your home. I used to jump between DEs on the same install and it was perfectly viable, just required a little manual work.

  • Swiggles@lemmy.blahaj.zone
    21·
    10 months ago

    In general it is safe to install as many DEs as you want. There is some overlap between (user) configuration files though which might be annoying.

    It should be fine to experiment, but you might need to restore some settings afterwards. For daily use I would just stick to one DE. Personally I don’t think there is really a reason to use multiple DEs as a single user. It would throw me off and mess with my workflow.

    Also keep in mind that many DE also provide a set of default tools which add clutter. So you probably want to keep it low for this reason alone.

    • Macaroni9538@lemmy.mlOP
      1·
      10 months ago

      thanks man, it’s the explorer in me. I nixed that triple boot idea lol so I figured i would choose one distro (fedora 38) and experiement with DE’s instead. it has not been working about great to say the least…

  • Ocelot@lemmies.worldEnglish
    19·
    10 months ago

    gdm works pretty well with selecting and jumping to all kinds of different DEs. It shouldn’t really be a problem. The only thing I might watch out for is KDE/gnome for example can install a TON of dependencies that you might not necessarily want in both. You can wind up with a lot of duplicate programs. and your home directory will be full of all kinds of config files.

    But you can run hyprland, i3, xfce, awesome, etc alongside each other without too much hassle.

    I have had the same arch linux install for the past 13 years and have been on a ton of different DEs in that time including times when I switched back and forth between a few concurrently installed. It never caused any issues for me other than trying to clean up all the K programs that had been installed, and cleaning up my home dir.

  • Gamey@feddit.rocks
    16·
    10 months ago

    It can mess with configs, themes and some other annoying stuff so I never did it again but there is no big risk or anything, it’s just a little tedious to fix small things afterwards!

    • Macaroni9538@lemmy.mlOP
      2·
      10 months ago

      ahhh I see, I don’t quite know how to configure and tweak the new DE to work properly though. I also read to use different usernames for each DE, but I don’t see why that matters.

      • Gamey@feddit.rocks
        2·
        10 months ago

        If you create multiple user accounts you can contain the user specific parts for those accounts if I am not wrong, certain thing will probably still be a little messy but I only tried it on the same account before and never did again, that could pribably help a little!

  • RHOPKINS13@kbin.social
    15·
    10 months ago

    There’s no one “proper” way. Running multiple DEs shouldn’t break anything, but each DE comes with it’s own set of dependencies and other software, so it does add clutter. There will also be considerable overlap with config files, so if you change a setting in one DE, it could change settings when using another DE.

    Having a separate user account per DE will prevent most of the configuration overlap, but it doesn’t solve the abundance of packages you’ll have installed from having multiple DEs. I don’t think there’s a great “clean” way to do it.

    One thing I love about Linux though, is how relatively flexible the user home directory is. When moving to a new distro or PC, usually everything you need to copy over is within your home directory. For what you’re trying to do, I’d consider throwing /home on a separate partition. That way, you can try out multiple DEs and distros, without blowing away your home folder. And you’d be surprised at how small your root partition can be, the vast majority of your storage should likely be reserved for /home. The Steam Deck, for example, uses a root partition that is only 5 gb. On a typical Linux system, I’ve found 64 gb to be plenty for root.

    When switching distros and/or DEs, consider cleaning out various config files in your home folder. Almost all of them will be hidden files that have a filename that begins with a period. I only keep specific config files for programs I want to retain data for, like Google Chrome (.config/google-chrome), Thunderbird (.thunderbird), and Steam (.local/share/Steam). If you use SSH keys you’ll want to keep your .ssh folder too. But deleting all other config files will give you a pretty clean start when changing DEs.

    • Macaroni9538@lemmy.mlOP
      1·
      10 months ago

      Thanks alot. just the fact that when I try to install the deepin environment, it looks totally off and many important parts are not even functional. so its hard to narrow down if that DE is just crap or if I’m doing it all wrong

  • gnuplusmatt@startrek.website
    111·
    10 months ago

    Move to silverblue/kinoite and when the urge to use another DE just rebase the OStree to the other branch - Silverblue for Gnome, Kinoite for KDE, Sericea for sway, Vauxite for xfce and there are some other not yet official branches for other DEs on Quay

  • Redo11@szmer.info
    9·
    10 months ago

    Other than some autostart apps, you are free to do whatever you want. I actually like having at least 2 DEs, one generic with default settings and one customized for everyday use. Also, they should use different backends. Then if I completely mess up with my config, I’ve got a fallback.

    • everett@lemmy.ml
      2·
      10 months ago

      Autostarts are the one thing I’d point to too. It’s nothing harmful but can be a little annoying if you need different scripts or tools to run on your different DEs.

    • flashgnash@lemm.ee
      1·
      10 months ago

      If you haven’t already give NixOS a go, used to have a dual boot as a fall back but using nix I’ve got the courage to screw around to my heart’s content cause I can always just load an earlier version of my config and/or wipe the machine and be back up to speed in 20 minutes if need be

        • flashgnash@lemm.ee
          1·
          10 months ago

          If you start with the default config and just modify it from there you can figure it out as you go

          Installing software is usually just a case of adding the name to the package list in your config (you can find packages and options on search.nixos.org/packages

      • Reminder9754@techhub.social
        0·
        10 months ago

        @flashgnash @Redo11 I use Debian and Arch and could also wipe out my machine and be back in 20 mins or less. Nix is great but this is not Nix specific. As long as you have a backup of your files and config, recovery is quick on basically any distro.

        • flashgnash@lemm.ee
          1·
          10 months ago

          Nix makes that process a whole lot simpler and more robust imo

          If you do it via the config file, you can simply revert one line of code and rebuild and you’re back, if you use backups unless you backup before every single change you make it’s much more heavy handed what you revert

  • Crul@lemm.ee
    8·
    10 months ago

    I’m an ultra-noob, so those who know more please correct me.

    I’m playing with Linux VMs and recently I installed Debian to check it out. When it asked what DE I wanted, I chose all of them :).

    The only hard conflict (AFAIK) is the [compontent / feature responsible for loging in] (I don’t know the technical term). Because each DE comes with a different one, you need to choose one.

    What I found very confusing in practice is that I could see some DE apps and configuration settings from other DEs. So, unless you know what belongs to what, it’s a bit of a mess (in my VERY limited experience).

    • qyron@sopuli.xyz
      6·
      10 months ago

      Destop Manager (DM).

      There a couple of them. Gnome has it’s preferred, I’d risk KDE has its own (was never a user of KDE), there is LightDM, etc.

      And they tend to dislike eachother

      • Crul@lemm.ee
        8·
        10 months ago

        LightDM says it’s a Display Manager.

        I know that naming is hard but, oh my…, terms are so confusing when you’re starting:

        • Desktop Environment
        • Windows Manager
        • Desktop Manager
        • Display Manager
        • Tiling Window Manager
        • Compositing Window Manager

        … I’m still not sure which ones are synonyms, sub categories or independent components :/.

        • NotSteve_@lemmy.ca
          4·
          10 months ago

          I’ve used Linux for about a decade and I still mix them up sometimes if I’m not actively working with them

        • Gamey@feddit.rocks
          2·
          10 months ago

          There are just too many terms, just give enough context and people will understand it regardless tho!

    • Tayphix [any]@hexbear.net
      2·
      10 months ago

      The program responsible for logging in and starting your window manager is called the display manager. Sddm is the default for KDE and GDM is the default for Gnome.

      Technically, you don’t even need a display manager as you could login and start the window manager manually directly from the TTY. That’s just mainly useful for when you break something in your display manager config though.

    • Macaroni9538@lemmy.mlOP
      1·
      10 months ago

      Endeavour is interesting… however I dont think they have deepin or cutefish, the two DE’s I am most interested in trying

    • Macaroni9538@lemmy.mlOP
      2·
      10 months ago

      that’s what I heard and that’s what I tried, but gnome is automatically default with new users obviously. Its fine to just install a new desktop right on top of gnome like that? and are there any other factors I need to worry about such as display managers or anything else? thanks

  • GnuLinuxDude@lemmy.ml
    7·
    10 months ago

    I have kind of messed some things up by installing KDE on my Fedora that already has Gnome. This was almost a year ago, now. I would not advise doing this. It is a bigger hassle than it was worth, and I’m just looking forward to a free moment when I can wipe and clean install.

    • Macaroni9538@lemmy.mlOP
      1·
      10 months ago

      Thanks, but how does one utilize or even explore other DEs within a distro without messing things up? is it just not possible or am I going about it wrong?

    • teawrecks@sopuli.xyz
      1·
      10 months ago

      I’m curious what things were “messed up”. I tend to not install more than one on my machine, but at the very least it seems like it should be a typical usecase for multiple users on the same machine to prefer different DEs when they log in. If that breaks somehow, it sounds like someone has a bug.

      • GnuLinuxDude@lemmy.ml
        4·
        10 months ago

        Some aspects of theming are messed up, like the spacers on my GTK4 drop menus are just flat gray rectangles (they look like placeholder assets). Also launching some programs after a fresh boot now take an inexplicable long time, but only the first time. So for example, if I reboot and launch Firefox or Nautilus it will take an extra 5-6 seconds. Every subsequent time any slow launching program will be fast so long as one of the slow launching programs has been started.

        Finally, not a messed up thing, but there is just needless clutter of stuff in my config files, now, since I’ve got KDE, Gnome, and actually a couple other DE things laying around, now. Mind you, this is all after I’ve already uninstalled KDE.

        Edit: I thought about what I wrote and it occurred to me some of that stuff might be because of bad gtk4 config files. So I deleted them and rebooted. The theming is correct again as far as I can tell, but the slow launch stuff persists.

        • nora@slrpnk.net
          2·
          10 months ago

          You probably have xdg-desktop-portal-kde installed and enabled. Try installing xdg-desktop-gnome and remove the KDE one and see if it makes a difference in launch times.

          Edit: I’d also reboot afterwards

  • woelkchen@lemmy.world
    61·
    10 months ago

    Gnome developers had the genius idea that a session cannot be locked when GDM is not the login manager, so using GDM is basically a requirement for real-world scenarios outside VMs.

    Often distributions have some sort of meta package that installs everything related to that desktop, including many applications. Better install the session package and the file manager package and go from there.

  • qyron@sopuli.xyz
    5·
    10 months ago

    Brings back memories.

    My last experiment with that was a few years ago and I thank the creator of debfoster for the help to clean the house up after.

    Unless things have changed and you run perhaps a fully containerized system or mannually install just the DE without any bundled SW, you’ll face DE seepage. KDE will throw new programs into the user space that will show on GNOME, getting a windows manager will probably throw conky into the system, Cinnamon will throw a few other things into the pile, and so and so forth.

    My personal experience taught me that the system loads those resources for any user to access at will.

    If you are looking to evaluate which DE will be the better fit for you, I’d advise trying one by one for at least a week or go for live mediums.

      • flashgnash@lemm.ee
        1·
        10 months ago

        I kinda want to move to sway/hyprland, am currently using Gnome frankensteined into a tiling WM

        From what I hear you get a barely functional system to begin with though and I do like that everything in gnome just works as expected and doesn’t require me to set it up