You can order those directly from chip suppliers (mouser, digikey, arrow, etc.) for a lower cost than you could get them from framework. Also those are going to be very difficult to solder/desolder. You’re going to need a hot air station, and you need to pre-warm the board to manage the heat sink from the ground planes.
Not as impossible sounding. I mean I would never attempt it but you might be able to get away with it using a stencil, solder paste and one of those fancy toaster ovens with a broil setting. ROI would suck since you are probably gonna fail the first couple of times.
Are they going to at least make memory modules available for those who want to solder their own?
You can order those directly from chip suppliers (mouser, digikey, arrow, etc.) for a lower cost than you could get them from framework. Also those are going to be very difficult to solder/desolder. You’re going to need a hot air station, and you need to pre-warm the board to manage the heat sink from the ground planes.
Not as impossible sounding. I mean I would never attempt it but you might be able to get away with it using a stencil, solder paste and one of those fancy toaster ovens with a broil setting. ROI would suck since you are probably gonna fail the first couple of times.