This undercover warranty investigation is a one-year follow-up from our series that investigated ASUS for motherboards incinerating AMD CPUs, at the end of which ASUS promised a number of improvements to its then-anti-consumer warranty processes. Spoiler alert: They’re still anti-consumer. We sent our ASUS ROG Ally Z1 Extreme in for warranty repair for issues with the left joystick (“drift”). The device also had a broken microSD card. ASUS then pointed to the world’s tiniest scratch and tried to charge us $200 for it under threat of sending back a disassembled device if we didn’t pay within 5 days. It felt like extortion. If you’re wondering whether ASUS is worth buying, the answer for anyone who values support should be “no.”

We have now tested ASUS’ motherboard and ROG Ally warranty and RMA processes. Both have been anti-consumer experiences.

    • Dudewitbow
      link
      fedilink
      arrow-up
      36
      ·
      edit-2
      6 months ago

      I basically always tell people, if you’re buying Asus(in the U.S), youre essentially buying something new in box, but essentially considered used. Treat it as if its open box sale, because they will fight tooth and nail to attempt to deny your warranty.

      Its a problem at various levels, primarily with the major Taiwanese Brick and Mortar companies. The sad part is how ubiquitous they are when it comes to the DIY portion of PC building.

      • Catoblepas@lemmy.blahaj.zone
        link
        fedilink
        arrow-up
        16
        ·
        6 months ago

        I don’t have the time/money/bug up my ass to do it, but I feel like buying a few components, not using them, and sending them in for “repair” after a few months would be an interesting way to audit their warranty coverage.

  • umbrella@lemmy.ml
    link
    fedilink
    arrow-up
    53
    arrow-down
    3
    ·
    6 months ago

    im truly dissapointed by asus’ enshittification.

    it used to be THE goto motherboard many moons ago

    • ArtikBanana@lemmy.dbzer0.comOP
      link
      fedilink
      arrow-up
      27
      arrow-down
      1
      ·
      edit-2
      6 months ago

      Specifically motherboards or in general?
      I’ve heard a lot of good things about Asrock motherboards. And they’re also about the only ones without some recent controversy (for AMD CPUs).

      In general, I can personally vouch for Noctua.
      They sent me a free mounting kit for my then 7 year old CPU cooler when I switched it over to a new PC. I’ve had it for 12 years now.

      Edit: Never mind, looks like also Asrock aren’t too great.

        • Rognaut@lemmy.world
          link
          fedilink
          arrow-up
          11
          arrow-down
          1
          ·
          6 months ago

          I worked with a guy that said “don’t tell me you used noctua fans on your 3d printer” I was like 😮. He really thought they were shit. He’s wrong.

          • commandar@lemmy.world
            link
            fedilink
            arrow-up
            14
            ·
            edit-2
            6 months ago

            For 3D printers, they’re subpar.

            Noctua fans are typically 12v and tuned for lower speed for lower noise; in 3DP you’re generally looking for 24v fans* with the highest CFM:static pressure ratio you can get which will generally mean a louder, higher RPM fan.

            They’ll work, but you can generally get industrial fans from Delta, Sunon, etc that are a better fit for the application, often for less money.

            * - 5v and 12v fans are getting more common simply because they tend to be more available. Preference for high CFM:static pressure holds true regardless.

          • SoleInvictus@lemmy.blahaj.zone
            link
            fedilink
            arrow-up
            6
            ·
            6 months ago

            They’re not shit, but a lot of people don’t realize that a big reason they’re quieter is because they don’t spin as fast, therefore they’re moving less air. Noctua is typically trading cooling performance for less noise, which can also be achieved by throwing a resistor inline on a non-Noctua fan.

            That being said, their motors are higher quality and, at least in my experience, tend to last longer than cheap fans.

      • bfg9k@lemmy.world
        link
        fedilink
        arrow-up
        8
        ·
        6 months ago

        I got burned by ASRock years ago, they are literally just Asus but with less quality control

          • bfg9k@lemmy.world
            link
            fedilink
            arrow-up
            4
            ·
            6 months ago

            It was between 2010-2016, myself and a few of my mates tried them on a few times over the years and they crapped out every time after a couple months. Swore off them for good after that.

      • onion@feddit.de
        link
        fedilink
        arrow-up
        5
        ·
        6 months ago

        I can tell you bad things about a crappy Asrock AM3 board I got a decade ago

        • ArtikBanana@lemmy.dbzer0.comOP
          link
          fedilink
          arrow-up
          9
          ·
          6 months ago

          Yeah, from what I’ve seen they weren’t great before and have switched things up in recent years.
          But I haven’t had any personal experience with their boards.

        • Delphia@lemmy.world
          link
          fedilink
          arrow-up
          7
          ·
          6 months ago

          From what I heard Asrock became a joke quality wise and got the shits about being the lowest quality mainstream manufacturer and did something about it.

      • pacoboyd@lemm.ee
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        6 months ago

        Honestly, I’ve had nothing but good luck with Asrock. The few times I’ve needed at MB replacement (one was for a 2 year old board that had a known issue, Intels fault, not theirs) they just sent me a replacement board after I sent mine in.

        Its probably been 5 years since I’ve had to use thier RMA process, but I’m still putting Asrock boards in everything I build. I build for pretty much all my friend and family circle (probably 3-8 builds a year) and I don’t know of any that have had an issue so far (they would for sure come back to me for help if they did).

        Taichi is such a great enthuaist line and Steel Legend is a great mid range. I’ll always recommend them.

      • Rai@lemmy.dbzer0.com
        link
        fedilink
        arrow-up
        2
        ·
        6 months ago

        I don’t have much experience with Corsair, but when one of my fans on my AIO went janky, they sent me a label and then shipped me a newer model that looks brand new.

        …it’s going in another machine, as my compy now has a D15

      • FiniteBanjo@lemmy.today
        link
        fedilink
        arrow-up
        5
        arrow-down
        5
        ·
        edit-2
        6 months ago

        I don’t vouch for anybody at all but I enjoy my Gigabyte motherboard.

        EDIT: Now that I think about it, there was an auto-update firmware vulnerability, a potential backdoor, a couple of years ago that affected most of the new models, but my Aero G x570 was not on the list.

    • tty5@lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      6 months ago

      I’ve had good experience with EVGA both times I’ve had problems with their hardware, this year most recently. MSI is supposedly OK too, but I never had to deal with their warranty.

      • Detective'@slrpnk.net
        link
        fedilink
        arrow-up
        4
        ·
        6 months ago

        Heard good about EVGA and Sapphire too. However my personal experience with MSI(laptops) have not been great. But shame about Asus as they so much more than EVGA and Sapphire as they only make Graphic Cards AFAIK.

    • psvrh@lemmy.ca
      link
      fedilink
      arrow-up
      5
      ·
      edit-2
      6 months ago

      There’s Supermicro and Tyan, but they’re…a different market.

    • Gadg8eer@sh.itjust.works
      link
      fedilink
      arrow-up
      3
      arrow-down
      3
      ·
      6 months ago

      Fair warning, don’t mess with the internals of the device because - as a Chinese company - their warranty is prohibitively anti-repair, but…

      OneXPlayer. Specifically the OneXFly. More ergonomic than the steam deck, far more powerful than both it and the ROG Ally, has an SD Card slot that doesn’t fry itself like the Ally, and comes with a decent warranty for what is essentially the Chinese Lamborghini of GamerDecks. Again, don’t try to fix it yourself, it works well but if anything goes wrong (I had to wipe the SSD and didn’t know how to do so without removing it physically) then you’re screwed.

      If you have big hands, just buy a Steam Deck OLED. It’s about as good as it gets for customer service to rely on Valve.

    • Nithanim@programming.dev
      link
      fedilink
      arrow-up
      1
      arrow-down
      1
      ·
      6 months ago

      Gigabyte Aorus maybe? Some years ago I sent in my MB that suddenly stopped working via the store I bought it from. No issues. Repaired and fully functional since.

      I sent in another one after for a very weird issue. Long story short, I think something is slightly broken with the RAM slots but since it happens “only” sometimes (depends on how hardware is plugged in; and also randomly), they could not find any problem and sent it back as “OK”. So I am only partial disappointed. Process was without friction and charge.

      The board that still currently drives my computer is asrock. Won’t buy them again because they put the cooling fan directly below the (hot) grapics card, made accessing m.2 real shitty and were missing a uefi feature I thought was standard (from gigagbyte; which graphics to use for init).

      All my boards fall in the highend category, but not the absolute top. Also, I am in the EU.

      • fatalicus@lemmy.world
        link
        fedilink
        arrow-up
        6
        ·
        6 months ago

        Gigabyte has been selling motherboards with a backdoor vulnerability.

        And during the GPU shortage a couple of years back they, together with newegg, sold GPUs only bundled with PSUs, but the PSUs were so bad quality that they literally blew up, and if you tried to RMA the PSU they refused unless you sent back the GPU as well.

        • keyez@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          6 months ago

          They did push new firmware about 10 days later to fix that vulnerability, and that portion was easily disabled until and after the patch. I remember that coning out as I’ve only had gigabyte boards for the last 12 years in 4 PCs and they’ve been great.

        • Nithanim@programming.dev
          link
          fedilink
          arrow-up
          1
          ·
          6 months ago

          Oh, yeah, the PSUs. Forgot about them since I wouldnt buy them. As long as they do not enshittyfy their mainboards…

          As far as I remember it was partly windows fault too for loading this? I don’t have windows so I think i forgot about that too.

  • Showroom7561@lemmy.ca
    link
    fedilink
    arrow-up
    22
    ·
    6 months ago

    Having been through warranty hell with ASUS years ago, this doesn’t surprise me.

    Such an unethical company that deserves nothing but hardship and bankruptcy.

  • JCreazy@midwest.social
    link
    fedilink
    arrow-up
    24
    arrow-down
    3
    ·
    6 months ago

    A year or so ago ASUS repaired my video card for free that I had bought second hand and was a couple years of warranty so my limited experience with their customer service has been pleasant.

    • vithigar@lemmy.ca
      link
      fedilink
      arrow-up
      3
      arrow-down
      1
      ·
      edit-2
      6 months ago

      Same here. Sent back a ASUS video card for warranty service within the past couple of years. Was updated in a fairly timely fashion that they were able to reproduce my issue and a replacement card was sent to me without fuss. No issues at all.

      Though there was one odd factor where I sent the card back in its original TUF branded box and it came back in a Strix box. That doesn’t really impact the quality of the service though.

  • MudMan@fedia.io
    link
    fedilink
    arrow-up
    17
    ·
    6 months ago

    So my experience with ASUS is that they do do this, but they do all of it. To be clear, in the video they explain that once they rejected the outrageous charge for minor cosmetic damage they did get both the reported in-warranty fix and the unreported SD card reader damage fixed. The issue here is ASUS including language that suggests you will forfeit the warranty fix if you don’t accept the extra charges and attempting to charge you for superfluous fixes.

    The last time I had to send something to ASUS for a fix they insisted on very detailed up-front images and they did send a bunch of confusing emails like these, but they also did fix the issues after I just chose to ignore the incongruous automated email responses.

    Which is not to say I’m defending the practice. When I later had some RAM compatibility issues I chose to ping the RAM manufacturer first instead of ASUS because I knew ASUS’ processes would be more of a pain, which is 100% the intended outcome.

  • NekoRogue@slrpnk.net
    link
    fedilink
    arrow-up
    12
    ·
    edit-2
    6 months ago

    I’m in the process of investigating a sudden overheating issue in my PC and I see this. I have an ASUS ROG motherboard and a Ryzen CPU. I’m not a hardware expert at all, but now I’m wondering if this is relevant to my situation. I didn’t know about the ASUS/AMD issue.

  • Statick@programming.dev
    link
    fedilink
    arrow-up
    6
    ·
    edit-2
    6 months ago

    About 7 years ago… Friend and I built PC’s about 6 months apart, him first, then me. Same ASUS motherboard. 2 years go by and his motherboard just dies. Few months later, mine dies. They honored the Warranty but the RMA process was awful. Little to no communication and it took a month for each of us to get refurbished motherboards back. I have not used a single ASUS product since.